Fire Alarm Systems Installing and Maintaining

 

In addition to a fire sprinkler system, if you wish to keep your home safe, then installing a fire alarm system should be another top priority. If an unexpected fire occurs, a fire alarm system will warn you in seconds. As a result, you should be able to save your friends and family in a timely manner.


Mill Brook Fire Protection is a full-service fire protection company based out of Long Island, New York, from installation to maintenance, Mill Brook is a company you can count on, as we work hand in hand with multiple well-known fire alarm contractors, as well as offering installation ourselves.


Did you know your fire alarm systems can degrade with time? But don’t worry, we have a quick solution for you. With regular maintenance, you can achieve optimum operating performance. 10-15 years down the line, your system will function perfectly only if you have carefully installed and maintained it. After all, you wouldn’t want the system to malfunction, right?


According to the National Fire Protection Association (NFPA), an average of 60% of fatalities occur due to a lack of fire alarms installed inside a building.


How to Install a Fire Alarm?


Installation is simple if you know who to contact. Mill Brook Fire Protection has been working alongside a handful of fire alarm contractors in both domestic and commercial properties. Our affiliates are a one-stop shop for fire alarm services. We assist to install alarms that bear the label of a recognized testing laboratory. 


These interconnected alarms provide optimum security, but these interconnected alarms are tricky to install by yourself. For this, you need professional help.

 

 How to Maintain a Fire Alarm?


If you have moved into a new building, make sure you get your fire alarm tested. You must know how old your fire alarm is. If it’s outdated and not in working condition, then you can get it replaced.


If your system is relatively new, let’s say under five years old, then it requires very little maintenance. You can expect failure of a few components of the system if the system is older and not properly maintained. 


Your system can be beyond technological life expectancy, but don’t worry, with regular maintenance and testing, it can still perform adequately.

 

Here are few steps through which you can maintain your fire alarm:


  • Perform routine testing. Record and note any of the faults. Do this to ensure your system is in working condition.
  • During testing, inspect the detector call points and zones. A fire alarm has multiple zones.
  • Calibrate alarm sensors.
  • Check transmission signals and disconnection of alarms. The automatic release of fire doors should be checked thoroughly.
  • Quarterly inspections are recommended.
  • Ensure cable fittings are inspected annually. Ensure to confirm they are secure and well protected.


If you have the required knowledge, then these steps will appear to be simple. The best-designed fire alarm systems can become useless if not properly installed and maintained. These systems require thorough inspections. Before you obtain professional help, ensure the contractor is licensed and certified.


Source: Fire Alarm Systems Installing and Maintaining

Location: Hauppauge, NY, USA

Comments

Post a Comment

Popular posts from this blog

Fusible Link vs. Glass Bulb Sprinkler Heads — What are the Differences?

Image
  In the category of wet-pipe fire sprinkler systems — there are two types of sprinkler heads: the Fusible Link and the Glass Bulb. Although both these fire sprinkler heads serve the same purpose and work almost similarly, there are still multiple points where these two differ. So, to determine whether which fire sprinkler head can better suit your requirements — we have explained the difference between both of these fire sprinkler heads in this article. So, keep on reading! Starting with Fusible Link Fire Sprinkler Head:  Fusible Link Fire Sprinkler Head A Fusible Link Sprinkler Head contains a heat-sensitive alloy covered with a two-part metal element — with a link holding the plug ready. When the temperature of the surrounding rises to a preset degree, the alloys melt — releasing the metal elements to separate and freeing the pip cap to dispense water (that is already pre-filled in the pipes). And, how does a Glass Bulb Fire Sprinkler Headwork? Glass Bulb Fire Sprinkler Head A Glass
Read more

Why is a Monthly Fire Extinguisher Inspection Essential?

Image
  At work, school, or at home, you may not be aware that fire extinguishers are installed throughout the building. Many people will never think of a fire extinguisher again until they finally need it. Imagine how unhappy it would be if a small fire broke out at home or at work. You reached out and tried to use the fire extinguisher, but found that a fire had broken out. You can avoid this scenario by checking the fire extinguisher regularly. Monthly Fire Inspection Properties   Fire extinguishers should be visually inspected monthly. This can be done by the building owner, but it is desirable for an authorized company to perform this task. These inspections look for defects that may interfere with the operation of the fire extinguisher. Being careful of damage can ensure timely maintenance that extends the life of all fire extinguishers. If this is done by the building owner, you can give basic guidance on what to look out for. Monthly inspection is essential regardless of who performs
Read more

What Is a Fire Safety Audit?

Image
  Fire accident causes high loss to a business, property and sometimes, many business shutdowns or go bankrupt because of fire that causes high damage to their assets. The fire safety audit is an analysis of fire protection devices like fire alarms, smoke detectors, fire sprinklers, and extinguishers. It helps in examining the preventive measures according to local authorities. In a fire safety audit, a fire safety engineer or a team of fire safety engineers examine your whole premises, conduct an audit, and check all fire safety and prevention factors. After examination, fire safety engineers prepare a report about the proper functioning of fire safety devices, and if there is a loophole, they communicate to the owner or the responsible person to prevent any future casualties. They also train staff on how to react during fire accidents. After the audit, they prepare an action plan according to the report.   Source:   What Is a Fire Safety Audit?
Read more